Call us: 49-6003 / 93 45 98 - 0 | E-mail:

Automated H2O2 room disinfection solutions

Disinfection of mold

H2O2 disinfection of mold using aerosolized Hydrogen Peroxide technology (aHP)

Disinfection of mold

Mold disinfection

Fully-automated and additional method for disinfection of mold

It should be noted that the bio-decontamination with DioProtection cannot be used to relieve a highly mold contaminated area of all its problems in the short term. DioProtection is being used as an additional mold fighting method to the basic reorganization steps such as removing plaster and old floor coverings for minimizing dangerous fungal spore loads.

Mold removal with Diosol hydrogen peroxide

Molds may severely harm people and damage materials. The situation becomes particularly problematic when the contamination through molds and their spores in rooms starts increasing; especially when there are pathogenic species attacking people’s immune system. In this context, the fully-automated DIOP aerosol disinfection is a complete and professional technology for mold protection purposes.

The temperature in indoor areas is usually favorable for fungal growth. In addition, enough organic material, such as wallpaper, glue, wood, etc. is available. In housing accommodations we are dealing with about 100 different fungi. All molds may cause allergies.

The aerosol disinfection or cold fogging technology by DIOP is used wherever invisible mold spores in the room air present a serious danger to the health of people. There is no need to say that for this purpose a suitable and microbiologically proven disinfectant such as Diosol-8, Diosol-12 or Diosol-19 must be used in combination with the DiosolGenerator .

The impressively simple DIOP fogging disinfection just needs 4 ml/m3 . During the decontamination process, the existing mold spores and the permanently circulating mold fungus components in the room, room air as well as on surfaces and equipment will be eliminated reliably. In many practical cases in the field of building restoration, DioProtection is permanently providing significant germ-reducing results. With DioProtection you are absolutely on the safe side when fighting molds!

Advantages of hydrogen peroxide room disinfection in hospital hygiene and infection control as well as outbreak management

Natural surface disinfectant

99,99% – 100% biodegradable

Free from alcohol

All Diosol disinfectants do not contain alcohol, aldehydes, chlorine, phenols and quats

Clinically proven disinfectants

Clinically tested with Diosol disinfectants in numerous studies


Validatable disinfection method for mold removal service providers according to German guidelines and European norms

The advantages of the DioProtection rooom, air and surface disinfection system for mold removal companies based upon Diosol hydrogen peroxide

The features of our DiosolGenerator decontamination systems such as mobility and ergonomic design, allow a user-friendly disinfection in mold remediation.

Efficiency Broad range of efficacy: Bacteria, molds, viruses and spores
Eco-friendly Safe technology based on hydrogen peroxide (oxygen absorber)
User-friendly Mobile, lightweight and easy-to-use device
Required manpower Works automatically with minimum manpower
Disinfectant consumption only 4 ml Diosol / m3
Documentation possibilities Yes, electronically (data logger, ppm, temperature, relative humidity etc.) as well as paper documentation
Room volume 0 – 850 m3, any kind of room volume can be reliably disinfected
Validation with bacteria (Enterococcus faecium, Staphylococcus aureus) and / or spores (Geobacillus stearothermophilus), see disinfection validation possibilities with bioindicators
Application possibilities in mold remediation Any kind of mould contamination and mold contaminated environment can be disinfected with DioProtection in combination with manual works. Especially molds in the air are being reliably eliminated.
Science / Norms Disinfection of mold in accordance with relevant norms

  • EN 1040 3/2006
  • EN 1276 1/2010
  • EN 1650 8/2013
  • EN 14347 8/2005
  • EN 13 704 5/2002
  • EN 14348 9/2005
  • EN 14476 12/2015
  • NF T 72-281 11/2014
  • EN 1656 11/2010
  • EN 1657 3/2006
  • EN 14 204 2/2013

The most complete disinfection of mold in any kind of building and environment